Club Equipment for Hire
In addition to all of the items shown in the Club Library - magazines, books, videos and DVDs - the Club has the following equipment available for hire to Club Members.
It is essential for Club Members to recognise that equipment is hired strictly on the basis of:
"if you break it, or lose it - you replace it".
The Club is unable to provide insurance cover for items being used outside of the Club premises. Fair wear and tear - from normal usage is acceptable. All equipment is hired strictly for one-month at a time (unless otherwise stated) and must be returned at the next Club Night meeting or at the end of the hire period. Be aware that there may be a waiting list for the equipment you want to hire. A full set of Terms and Conditions apply to all equipment hired. Click HERE to download a .PDF copy.
| Item Description |
Hire Cost per Month |
| Woodturning Lathe and Accessories (3/4" by 16 tpi spindle) |
£25/ month |
| SIP 01936 Midi Lathe |
or |
| Axminster Clubman K80 chuck with key and 'C' jaws |
£10/ month |
| 13 mm dia Jacobs chuck on No.1 MT |
for 6-months minimum |
| Knock-out Bar |
hire period |
| Axminster Eccentric Spiralling Chuck (3/4" by 16 tpi spindle) |
£4 |
| Axminster SK100 4-Jaw Chuck Package (M33 by 3.5 mm tpi thread) |
£8 |
| Includes: 'C' Jaws, faceplate ring and screw chuck |
|
| Woodturning Lathe and Accessories (T38 - M33 by 3.5 mm tpi spindle) |
£25/ month |
| Axminster AT1416VS Lathe |
or |
| SK100 4-Jaw Chuck Package |
£10/ month |
| MT2 - 1" dia. 4-prong drive centre |
for 6-month minimum |
| MT2 - standard revolving tailstock centre |
hire period |
| Woodturning Tools |
|
| Robert Sorby 6 piece Woodturning Tool Set + 2 Large Bowl Gouges |
£10 |
| Manufacture Your Own Wooden Faceplates |
|
| 33mm by 3.5 tpi Taper screw Tap, Spade bit and Tap Wrench |
£3 |
| 1" by 8 tpi Taper Screw Tap, Spade bit and Tap Wrench |
£3 |
| 3/4" by 16 tpi Taper Screw Tap, Spade bit and Tap Wrench |
£3 |
| Grinding Equipment |
|
| Record 6" diameter wheel - Bench Grinder |
£2 |
| Robert Sorby Grinding Jig including Fingernail Profiler |
£3 |
| Pyrography Equipment |
|
| Peter Child Pyrography Kit |
£8 |
| Robert Sorby Thread Chasing Kit | £8 |
| Internal and External Thread Chasers - 16 TPI | |
| Armrest/ Tool Support | |
| Undercut/ Recess Tool | |
| Thread Sizing Gauge | |